Desanders are the second phase of drilling fluids process. Includes two 12-in.(305-mm) diameter polyurethane hydroclones slant mounted over the shaker. Each desander clone includes four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. Thedesander is furnished...

A centrifugal device for removing very fine particles, or silt, from drilling fluids to keep the amount of solids in the fluid at the lowest possible point. The cut point can be as low as 4“. As muds are being used in drilling operations, they are contaminated with silts. In order to use again these muds, it is necessary to separate silts...

Vacuum Degasser is used to remove the small entrained gas bubbles left in the mud by the mud/gas separator. These units are positioned downstream from mud/gas separators, shale shakers and mud cleaners, while hydrocyclone desanders , desilters and decanting centrifuges follow in the arrangement. Some Advantages   1. Fewer unscheduled...

   The first line of solids control system has been and will continue to be, the shale shaker. proper screening of the drilling fluid during this initial removal step is vital to develop efficiency and effectiveness of all downstream solids control equipment in the system. Otherwise, the downstream hydrocyclones will simply be...

The TR solid control mud Cleaner combines hydrocyclones and a Vibratory Screen to provide liquid/solids separation at a high flow rate. As a first stage, the slurry is processed through the hydrocyclones, the cleaned liquid is carried out the Hydrocyclone overflow and the concentrated underflow (solids) are deposited on a vibratory screen deck....